Robots · PUDU

CC1 Pro: AI-powered autonomous cleaning robot for large areas

Sweeps, scrubs, vacuums and mops on its own, checks its results and re-cleans any remaining dirt. Covers 5,000 to 8,000 m² per operation.

CC1 Pro viewed from the front at an angle, with its screen and green side panel.

5,000–8,000 m²

coverage per operation

Up to 3,000 m²/h

in AI-powered spot cleaning

4 in 1

sweeps, scrubs, vacuums and mops

Rear AI camera

checks results in real time

No ceiling markers

visual navigation + LiDAR

IEC 63327

certification for autonomous cleaning machines

CC1 Pro in a store aisle, with an overlay illustrating navigation and environment mapping.

Navigates independently in large, busy spaces

Combines visual navigation and LiDAR (VSLAM+) to locate itself precisely without ceiling markers, even with people moving around and changes to the layout.

CC1 robot cleaning the floor near a puddle in a school setting.

Finds dirt and goes straight to it

In spot-cleaning mode, AI identifies stains and wet areas and replans the route to scrub only where needed, achieving 1,500–3,000 m²/h.

CC1 robot cleaning an office carpet beside work chairs.

Adjusts cleaning intensity automatically

Stubborn stains

Intensifies scrubbing wherever persistent dirt is detected.

Dirt level

Monitors the floor and changes mode automatically.

Floor type

Recognizes the floor and adapts cleaning.

CC1 Pro in a store aisle with an overlay illustrating AI dirt detection and floor inspection.

Checks its own work

The rear camera checks the floor after each pass; if a stain remains, it marks it on the map and returns to clean it. The same system monitors brushes and squeegees and alerts when they need attention to avoid spreading dirt.

CC1 robot beside a blue wall in a building corridor.

Safe around people

AI perception detects stationary and moving obstacles, allowing operation during business hours while people circulate.

Video

CC1 Pro in operation

Gallery

Two CC1 robots in a store beside display fixtures.
CC1 Pro shown from the front against a light background.
CC1 robot beside accessories and workstation modules.

Management and integration

CC1 robot viewed from the front and rear, with its rear compartment open.

Operation data

Dirt-point map
Where debris accumulates most.
Cleaning heat map
Where stubborn stains are located.
Operation dashboard
Tasks, cleaned area, maintenance and alerts.

Building integration

App-based management
Turnstile access
Optional.
Elevator use to move between floors
Optional.
CC1 robot connected to a workstation on a drainage platform.

Workstation

Optional accessory

  • Automatically refills and drains water.
  • Automatically recharges the battery.
  • Self-cleans the roller and squeegee.

Use cases

Where the CC1 Pro already operates

Cases published by manufacturers and the press, with sources.

In operation2025–2026World

200 cleaning robots across a supermarket chain

Denner (Migros Group), with integrator Robobee — Switzerland · CC1

15 Lof water to clean up to 2,000 m², versus more than 100 L with the manual method
Challenge:
Clean store floors with less water and less staff effort.
Solution:
A pilot in 4 stores in 2025, followed by a rollout of 200 CC1 robots, with training, maintenance and local support.
Result:
Floor-cleaning productivity more than doubled, and one in every three stores in the chain received the robot.

Sources: TechNode · The AI Insider

In operation2025World

Cleaning 80% more efficient at a hotel

Ryugujo Spa Hotel Mikazuki Ryugutei — Japan · SH1, CC1

600 hof work saved per year, according to the manufacturer
Challenge:
Cleaning the kitchen, lobby and common areas took an hour of work from two staff members.
Solution:
Adoption of the SH1 scrubber-dryer in those areas, alongside the CC1 the hotel already used.
Result:
The task fell from 1 hour to 20 minutes, an 80% efficiency gain, according to the manufacturer.

Sources: PR Newswire

In operation2025World

Cleaning rounds every 4 hours at convenience stores

QuikTrip — United States · CC1

3 to 6 minto check each cycle, versus 30 to 60 min for a manual pass
Challenge:
Keep floors clean all day without pulling staff away from customer service.
Solution:
The CC1 runs a round every four hours, covering about 1,860 m² per task; staff only check the result.
Result:
About 2.5 hours of work recovered per day, according to the reseller's estimate.

Sources: RobotLAB

View all cases ›

Deployment and support in Brazil

All service is provided by Humanoide Brasil.

CC1 Pro robots being demonstrated on the floor of a trade show booth.

Deployment

Environment mapping and routine configuration at the client's operation.

Training

Training for the team that oversees the robot day to day.

Technical support

Remote and on-site assistance from our technical team.

Updates and spare parts

Remote software updates and spare parts in Brazil.

CC1 Pro robot in operation

Technical specifications

Technical details

High-productivity cleaning for large areas.

Cleaning efficiency
700–1,000 m²/h in full coverage; 1,500–3,000 m²/h in spot cleaning
Coverage per operation
5,000–8,000 m²
Battery life
scrubbing 5 h; sweeping and vacuuming 5 h; carpet vacuuming 4 h; quiet mopping 9 h
Battery
50 Ah
Charging time
approx. 3 h
Tanks
15 L clean water / 15 L dirty water
Waste container
2.5 L (6 L with collection bag)
Cleaning width (with side brush)
500 mm
Minimum passage width
70 cm
Speed
0.2–1.2 m/s (adjustable)
Navigation
VSLAM+ (visual + LiDAR)
Screen
10.1 inches
Connectivity
4G, Wi-Fi and Bluetooth
Dimensions
629 x 552 x 695 mm
Weight
75 kg
Certification
IEC 63327
Compare with other models

Versions

The CC1 Pro line

Besides the CC1 Pro, the line includes the versions below, deployed and maintained by our team in Brazil.

CC1 robot in operation

CC1

Cleaning: sweeping, vacuuming, scrubbing and drying.

Cleaning efficiency
700-1000 m²/h
Tank capacity
15L Clean / 15L Dirty
Charging time
< 3 h
Battery life
4-9 h
Maximum speed
1.2 m/s
Suction power
17,000 Pa

Contracting

Available formats

01

Purchase + maintenance plan

The equipment is yours, with a contracted support plan: preventive and corrective maintenance and technical service in Brazil.

02

Monthly rental

No upfront investment. Monthly contract with support included and an option to transfer ownership at the end of the contract.

03

Try & Buy

A 1 to 2 month trial with our team on site. The trial fee is fully deductible if you go ahead with the contract.

Want the CC1 Pro in your operation?

Tell us about the scenario, the environments and the objectives. Our technical team will reply with the recommended setup and the most suitable contracting model.